BMYTV - K801 RESIN

  • MSDS: BMYTV
  • Manufacturer: K POXY
  • Product Name: K801 RESIN
  • National Stock Number: 8040-00N029230
Product Identification

Product ID:K801 RESIN
MSDS Date:05/16/1990
FSC:8040
NIIN:00N029230
Kit Part:Y
MSDS Number: BMYTV

Responsible Party
K-POXY
225 RIVERVIEW AVE
WALTHAM, MA 02254
US

Emergency Phone: 617-647-5560

Info Phone: 617-647-5560

Preparer: H. JAMES WHITE

Cage: 47078

Contractor
K-POXY
WALTHAM, MA 02254 US

Telephone: 617-647-5560

Cage: 47078

Ingredients

PHENOL,4,4'-ISOPROPYLIDENEDI-, POLYMER WITH

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: <25%


PHENOL-FORMALDEHYDE POLYMER, GLYCIDYL ETHER

CAS: 28064-14-4

Fraction By Weight: <5%


SILICA, AMORPHOUS FUMED; (FUMED SILICA (MFR CAS NO

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: <2%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


STAINLESS STEEL; (STAINLESS STEEL POWDER)

CAS: 65997-19-5

Fraction By Weight: >65%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: SLIGHTLY TOXIC. INHAL: HEATED
VAPS MAY CAUSE RESP IRRIT. SKIN: MILDLY IRRIT TO SKIN. MAY CAUSE
ALLERGIC RXN EVIDENCED BY RASHES. EYE: MODERATELY IRRIT TO EYES.
CHRONIC: PRLNGD CONT W/ SKIN MAY RESULT IN SKIN IRRIT & DERMAT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN AND
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT. PRE-EXISTING SKIN/ LUNG ALLERGIES MAY INCREASE THE CHANCE
OF DEVELOPING INCREASED ALLERGY SYMPTOMS.

First Aid

First Aid:EYE:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MIN & SEEK MD
IMMED. SKIN:REMOVE CONTAM CLTHG & WASH CONT AREA W/SOAP & WATER FOR
15 MIN. WASH CLTHG BEFORE REUSE & DISCARD CONTAM LEATHER ARTICLES.
GET MD IF SWELLING/REDDENING OCCURS. INGEST:IFAPPRECIABLE QTYS ARE
SWALLOWED, SEEK MD. DO NOT INDUCE VOMIT. DILUTE BY GIVING
WATER/MILK TO DRINK IF VICTIM IS CONSCIOUS. INHAL:IN CASE OF EXPOS
(SUPP DATA)

Fire Fighting

Flash Point Method:PMCC
Flash Point:>450F,>232C
Extinguishing Media:USE CO2 OR DRY CHEMICAL FOR SMALL FIRES: AQUEOUS
FOAM OR WATER FOR LARGE FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . REMOVE ALL IGNITION SOURCES. USE WATER SPRAY
TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE (DUE TO
BUILDUP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT. TOXIC FUMES WILL
BE EVOLVED IF THIS MATERIAL BURNS.

Accidental Release

Spill Release Procedures:DIKE SPILL. ABSORB WITH INERT MATERIAL AND
COLLECT FOR DISPOSAL. FLUSH AREA WITH WATER. PREVENT WASHINGS FROM
ENTERING WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID CONTAMINATION OF SKIN. DISCARD
CONTAMINATED SHOES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:WEAR A PROPERLY FITTED NIOSH/MSHA APPROVED
RESPIRATOR WHENEVER EXPOSURE TO VAPOR/MIST IS LIKELY UNLESS LEVELS
ARE BELOW APPLICABLE LIMITS.
Ventilation:LOCAL EXHST-REC WHEN APPROP TO CONTROL EMPLOYEE EXPOS.
MECH- NOT REC AS THE SOLE MEANS OF CONTROLLING EMPLOYEE EXPOS.
Protective Gloves:IMPERVIOUS GLOVES (NEOPRENE).
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:COVERALLS, APRON AND RUBBER FOOT COVERING
ARE RECOMMENDED. A SAFETY SHOWER AND EYEWASH FACILITY SHOULD BE
AVAIL.
Work Hygienic Practices:REMOVE AND THOROUGHLY LAUNDER CONTAMINATED
CLOTHING BEFORE REUSE.
Supplemental Safety and Health
FIRST AID PROC: TO A HIGH CONCENTRATION OF VAPOR OR MIST, REMOVE PERSON
TO FRESH AIR. GET MD IF EFFECTS PERSIST. ADMINISTER OXYGEN IF
NECESSARY.

Chemical Properties

HCC:V7
Vapor Pres:<1 @ 20C
Vapor Density:>1
Solubility in Water:NIL
Appearance and Odor:GRAY PASTE WITH NO DISTINCTIVE ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & MINERAL ACIDS. UNCONTROLLED CURING WITH AMINE
CURING AGENTS IN MASSES >2 INCHES THICK.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:FUMES PRODUCED WHEN HEATED TO DECOMP
MAY INCLUDE: CO, CO2, ALDEHYDES, AND ACIDS.

Disposal

Waste Disposal Methods:INCINERATE OR USE BIOLOGICAL TREATMENT IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS. DISPOSE OF AS
HAZARDOUS WASTE ACCORDING TO FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.